Merkusii Pine FJLB
Description
Finger Joint Laminated Board is made from joining short lamelas into finger joint stick, then go into lamination and sanding process to become boards. Our pine products are used for housing component and furniture market mainly in Japan and Korea
Standard Size
20/25/30mm x 500/600mm x 4200mm
Finger Joint
On top and side
Specifications & Grade
- Wood species: Merkusii Pine Finger Joint Board
- Moisture: 8 – 12 %
- Standard Size: 20/25/30 mm x 500/600 mm x 4200 mm
- Lamina Pitch:
- A/A Grade 30-43 mm
- A/AP Grade 25-43 mm
- AP/AP Grade 25-43 mm
- B Grade 25-43 mm
- C Grade 20-43 mm
- Length tolerance: -0/+5.0 millimeters
- Width tolerance: -0/+2.0 millimeters
- Thickness tolerance: -0/+ 0.3 millimeters
- Glue: B4
- Surface finish: sanding #180. Both sides of the wood board
- Quality: A/A, A/AP, AP/AP, B, C, A/C
Grade
| A/A GRADE | Two faces clear. Pin Hole, Short Hole, Knots, Tension Wood, Blue Stain, Heart Place, Chocolate color, Splits, Delamination, Rotten, Under size and finger crack are not acceptable. |
| A/AP GRADE | One face clear. Back side redish colour acceptable. But, Pin Hole, Short Hole, Knots, Tension Wood, Blue stain, Heart place, Chocolate Color, Splits, Delamination, Rotten, Under size and finger crack are not acceptable. Wrapping per piece. |
| AP GRADE | Red color allowed on both face, no blue stain allowed on face. Wrapping piece by piece. |
| B GRADE | Both face, no pinholes, no knots, mixed colour, reddish and bluestain allowed. Not wrapping per piece. |
| A/C GRADE | One face clear. Back side heart center, heavy bluestain allowed. Wrapping per piece |
| C GRADE | Heart center, heavy bluestain allowed. Not wrapping per piece. |